by Christina | Jul 15, 2021
Vortex Tutorial 1 – unpack the machine Unwrap the entire machine Remove 4 bolts which fasten the feet to the cradle A forklift can also be used for lifting up the machine Lift the machine Remove the cradle Lower the machine back to the ground Position machine at the... by Christina | Jul 13, 2021
Garment types in the X-Ray Machine Light garments Light garments, such as hospital-, food industry- or personal garments have typically very few details such as straps, thick metal zippers, rings or thick seams. These garments are very suitable for X-Ray operation,... by Christina | Jul 13, 2021
X-Ray Machine: ‘Check reject’ module The operator can accept manually the garment, even if it was rejected by the software and prevents therefore a sorting out the certain garment. ‘Reject’ (red) and ‘Accept’ (green) buttons are on the screen and on the inlet table.... by Christina | Jul 13, 2021
How to change THOR gripper belts Exchange the gripper belts on our THOR robot separator step by step with our tutorial. If there is any help needed, do not hesitate to call us! Required tools: no tools needed, optional screwdriver or similar tool Step 1:Get new... by Christina | Jul 13, 2021
Update PLC with an USB Drive Change the inverter’s output from relais to digital with this tutorial. If there is any help needed, do not hesitate to call us! Step 1: Put the files on a USB drive. Step 2: Access the PLC backside of the machine. Step 3: Insert the USB...
Recent Comments